Manual Razor Principle Introduction

October 09, 2022

Manual Razor Principle Introduction

A manual razor is generally composed of a knife head and a hoe - shaped tool rest. The tool holder is made of aluminum, stainless steel or copper, plastic, rubber, etc. The tool head is made of blade and plastic rubber. The blade is generally made of stainless steel and carbon steel. In order to ensure the sharpness and durability of the razor, the edge will be treated with special materials. In order to ensure smooth shaving, the knife head generally contains moistening and calming lubrication. When in use, install the tool head on the tool rest, and hold the handle of the tool rest to shave.

1. Fixed manual razor
The tool head is fixed on the tool rest and cannot rotate. There are two kinds of razors, one is a double-edged blade on the knife rack, that is, the earliest manual razor, commonly known as the security knife. The other is a fixed knife head on the tool rest, the knife head is composed of a single piece or more than one blade, this kind of razor is mostly Disposable Razor.

2. Rotate the manual razor
The finger tip can be rotated, and the tip can be removed and replaced, and the handle can be used continuously. The tool holder has a long handle and the blade is mounted on the tool holder in parallel in multiple layers. When shaving, the head of the tool rest can rotate with the shape of the face on the pivot of the upper part of the tool rest, so that the blade blade can maintain a good shaving Angle, and the front blade will pull out the root of the beard, and then be cut from the root by the rear blade. This manual razor is cleaner and more comfortable to use than a fixed manual razor.

The above is the Manual Razor Principle Introduction we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Next:What Is A Safety Razor