Razor Blade How Often To Change Razor Blade Replacement Steps
How often should the razor blade be changed
Generally speaking, about 2 months to replace once, but the soft and hard personal beard, beard amount is also the factor that determines the frequency of blade replacement. Razor Blades feel raw when shaving
Astringent and shaving is not smooth, it is the shaving tool to change the signal. Of course, in order to make the life of the blade longer, it is recommended not to throw away the razor when buying
After shaving, rinse the blade with water and put it in the knife box to dry. Do not litter on the washbasin, this will only let the blade breeding bacteria, reduce the life of the blade Life.
1, under normal circumstances, every 5-7 times to change a blade. But actually how often you change the blades depends on how thick your beard is and how often you shave it Face;
2. After shaving, remove dander with a brush along the blade, and then
spray on cleaning and disinfection lubricant to keep the blade sharp.
3. Clean the knife head often, but pay special attention not to hurt the blade when cleaning. When rinsing the knife body with water, the body had better not touch the water if you use the product
Is wet and dry type, the base part still do not touch the water, so as not to damage the motor.
4, do not use electric shaver lack of power, forced use will let electric shaver motor internal consumption.
5. It is easy to hide whisker and dander in the edge and pore of the inner and outer knife. After each use, it should be used
6, try to clean with a small brush. Because the curing of whisker and skin oil will hinder the movement and sharpness of the blade, it is necessary to often remove debris remaining on the edge.
7, because the knife is thin, so do not push the broadsword, so as not to deformation. Once distorted, it can block the inner knife from turning or cut the skin when used. If the edge hair
Deformed and damaged, should not be used again, otherwise there will be a risk of cutting.
8. Turn off the switch after use. To protect the blade, you must cover it with a protective cover, then box it and store the razor in a dry place.
Steps for replacing a razor blade 1, confirm the sharpness of the razor blade, shaving more difficult means to replace.
2. Press the button on the handle with your thumb, push the button hard, and the old blade will pop out.
3. Insert the handle into the prepared new blade, paying attention to the direction. Push hard, there is an obvious clamping sound, the razor blade replaced successfully.
October 09, 2022
